How to clean your catalytic converter without removing it

How to clean your catalytic converter without removing it

Most likely if you need to clean the car’s catalytic converter, you are going to be thinking that it is a pretty difficult job, especially if you want to do this without removing it from the car.

If you are in this situation, this article will definitely come in handy, because you will discover how to clean the catalytic converter without taking it off the car. This way you will be able to save a lot of money.

What do you need to know before you start?

{{{ad-code}}}

If you have not done this before, you must keep in mind some very important things in trying to clean the car’s catalyst, because it is possible that only a few moments of carelessness can lead to the loss of some components, and you won’t be able to repair it.

Catalytic converter

If this component of the car is so clogged that the engine is no longer able to run, then it is certainly necessary to remove the catalytic converter as soon as possible and use special tools to clean it, or for everything to be more Simple, you can choose to replace the entire catalytic converter.

1. Listen and check for loose parts

One simple thing you can do is take a hammer and hit the catalytic converter carefully to hear if there are any loose parts inside.

If you hear loose parts, it is very important to remove the converter to check it as carefully as possible, because there is a high chance that in this situation the parts could become weaker, which is why the exhaust pipe could become completely clogged., and so the car will stop running.

2. Cleaned catalytic converter

It is extremely important to keep in mind that a catalyst can be cleaned inside, while parts inside the converter can be removed from the exhaust pipe.

However, this task is much more difficult to accomplish than you think, so it is advisable to first remove only the catalyst and check it.

3. Oil consumption

{{{ad-code}}}

The car’s catalytic converter has a high chance of getting blocked due to internal oil consumption. This consumption takes place due to the fact that the oil can reach the cylinders and then it will reach the converter through the exhaust manifold.

In such a situation it is necessary to repair the internal oil leakage, because otherwise the converter can be blocked again after a short period of time.

If there are internal oil leaks, the symptoms are as follows: the piston rings or valve seals are broken, the crankcase ventilation is clogged. This may be an important aspect to specify is that every time in the first phase it is important to check the crankcase.

Cleaning the catalytic converter without removing it

If you have checked and listened to the catalytic converter carefully to find out whether or not there are loose parts, but also that is not clogged, then you can try the OXICAT product which cleans the oxygen sensor and the catalyst filter.

This is the magic solution for any car, whether it is on diesel, or on gasoline, or if the car is hybrid.

OXICAT not only plays an important role in cleaning the catalytic converter, but will also clean the O2 sensors, but also the entire car exhaust system.

It is important to know that this product cannot repair the mechanical defects inside the catalytic converter, if it is very clogged, cracked or broken. OXICAT is a catalytic converter cleaning solution that can run for a few burns.

For the solution to do its job, it is important to add the specified amount of OXICAT to the car’s tank, and then you have to drive the car for a few kilometers to see if the car can be driven better than before.that has made any change.

{{{ad-code}}}

It is again important to know that the temperature of the car coolant must be checked, permanently, and this way you will know for sure that there is no problem with overheating.

What to do if OXICAT does not work?

If you tried OXICAT and the product did not work, then all you have to do is remove the catalytic converter as fast as possible. Being removed from the car can it be inspected much faster.

There may be error code P0420, which indicates that the O2 sensors are faulty, or that there are leaks, and the problem is likely not to come from the catalytic converter.

Usually, removing the catalytic converter is not a very difficult task, but it is extremely important to note that there is a good chance the rusty screws might be destroyed.

{{{ad-code}}}

Some cars have these catalytic converters mounted on the turbo, so in the case of these cars it is much more difficult to remove the catalytic converter. That is why drivers in this situation would be advised to take their car to an authorized service, to remove the catalytic converter.

For those Drivers who consider or rather hope that the converter is clogged, it would be good to inspect it carefully and try to clean it with water and Thinner Lake. Often this solution is functional and can help drivers save some money.

If there are drivers who have tried to clean the catalyst and diagnosed it properly, and if they have detected with great precision and which parts are damaged, then they certainly have nothing to do but turn their attention to another catalytic converter.

Given the fact that inside these converters there are noble metals that have very high prices, the price of catalytic converters will certainly be quite high. The newer the car and from a more famous manufacturer, the higher the price of the converter.

Conclusions

Use a hammer to check that there are no loose parts inside the catalyst.

{{{ad-code}}}

The catalytic catalyst cleaning solution is only capable of cleaning, not repairing catalytic converters that can be broken, cracked or clogged.

If the catalytic converter cleaning solution has no results, then it is necessary to check the other parts of the converter, to know if they are somehow damaged, and for a possible inspection, it is necessary to remove the converter.

Catalytic converter cleaning can be performed in a diluent bath, provided that the converter is removed.

We also mention the fact that due to the precious metals that are found inside the catalytic converters, these parts can have very high prices, especially in the case of luxury cars.

{{{ad-code}}}

Photo source: whichcar.com.au, cars.com, carbibles.com, youtube.com